Gorilla is an analog,
mid-field monitor designed for
critical mixing and mastering applications.

Gorilla is an "acoustic suspension" loudspeaker.

Acoustic suspension is a type of loudspeaker enclosure in which drivers are mounted in a cabinet with no ports or vents. While vented (ported) systems boosts low-end output with the  tradeoff of introducing phase delay and accuracy problems, acoustic suspension systems deliver more cleaner and tighter bass than vented systems. Also, while ported systems are more efficient systems delivering higher volume, acoustic suspension systems are better for critical listening environments where the listening levels are not high, which makes Gorilla perfect for mixing and mastering applications...

  • Frequency range: 20 Hz - 20 kHz
  • Q of cabinet: 0.8 / f3 55.2 Hz / f6 44.1 Hz 
  • Linearity +/- 0.6 db between 91 Hz - 15 kHz
  • Linearity +/- 1.5 db between 65 Hz - 20 kHz

Gorilla is fully Analog!

This is the heart of Gorilla which is an active, analog crossover based on Linkwitz–Riley* filters. 

* A Linkwitz–Riley (L-R) filter is an infinite impulse response filter named after its inventors Siegfried Linkwitz and Russ Riley. This filter type was originally described in Active Crossover Networks for Noncoincident Drivers in the Journal of the Audio Engineering Society.


22 cm Aluminium Cone
Patented Symmetrical Drive


12 cm Paper Cone
Patented Symmetrical Drive


2.5 cm Coated Textile Diaphragm
Patented Symmetrical Drive


Gorilla has protection circuits!

If a critical electrical failure or high frequency signal (like microphone feedback) is detected, the amplifiers are shut down immediately and the red protection led on the front will be enabled.

Also if the maximum temperature is reached, the amplifiers are switched off to protect from damage. Additionally the red protection led on the front will be enabled. 

Gorilla will warn you in case of clipping!

If the amplifiers are clipping, the front red led will blink rapidly to warn you. At normal operation you should see the white led on. In case of too much clipping, the amplifiers will be shut down to protect your gear.


Woofer : 350 Wrms / THD+N %0.0015*
Mid : 350 Wrms / THD+N %0.0015*
Tweeter : 100 Wrms / THD+N %0.0016*

Load-Independent Frequency Response
Frequency-Independent THD

Meets 2013 ERP Lot 6 0.5W Requirements
Over Current / Thermal / High Frequency Protection
User Controlled Standby (120 mins, on or off)
* THD tests were performed for 1w at 1 kHz

Each driver has its own amplifier. So, in a pair of Gorillas there are 6 independent amplifiers.


We believe birch is the best wood for a loudspeaker enclosure since it facilitates better clarity and tone. Every enclosure we create is crafted by hand using birch trees sourced from the forests of the eastern Black Sea Region. The Black Sea Region runs along Turkey’s Black Sea coast, bordering Georgia to the northeast which is a natural habitat of birch trees. We care deeply about the environment and strive to source our woods ethically and responsibly.

We process carefully selected birch logs and make our own plywood panels. The reason we do not use solid wood and create our own plywood panels is simply to avoid warping which may occur in time by the moisture change. Since we are making timeless loudspeakers that will age with you, although this hard process takes more effort and time, it makes us feel better about creating a better speaker.



45 (w) x 32 (h) x 28 (d) cm 


27 Kg each


Min Voltage: 100-120 Volts AC ±10% 
Max Voltage: 200-240 Volts AC ±10%
Voltage Frequency: 47 - 63 Hz
Input power: 800W max


Please watch our dear friend Pieter Snapper's honest review about the Gorilla prototypes that he has shot nearly a year ago while testing the very early versions. Pieter is an independent mastering engineer from us, who is helping us with his valuable comments. 
Click to watch <<<


You can use GORILLA as your main monitors, as well as mid-field monitors in a larger setup with bigger main monitors.