Studio 20 is a three-way, active, near-field monitor, designed for critical mixing and mastering applications.
* Studio 20 is an acoustic suspension loudspeaker. Acoustic suspension (sealed) is a type of loudspeaker enclosure in which drivers are mounted in a cabinet with no ports or vents. While vented (ported) systems boosts low-end output with the tradeoff of introducing phase delay and accuracy problems, acoustic suspension systems deliver more cleaner and tighter bass than vented systems. While ported systems are more efficient systems delivering higher volume, acoustic suspension systems are better for critical listening environments where the listening levels are not high, which makes Studio 20 perfect for mixing and mastering applications...
Studio 20 Impulse Response
Studio 20 Sound Pressure Levels
Both measurements were made in anechoic room. No smoothing applied.
WOOFER
18 cm Paper Cone
Patented Sandwich Paper Cone *
Patented Symmetrical Drive (SD-3) *
MID
12 cm Paper Cone
Patented Symmetrical Drive (SD-3) *
TWEETER
2.5 cm Coated Textile Diaphragm
Patented Symmetrical Drive (SD-2) *
* Our drivers are patented under Scan Speak license.
ADJUSTABLE ACOUSTIC CENTER
Using the selection button at the back panel, you can set your average distance to each speakers for a better listening.
This process gives you a better electrical time alignment between drivers which gives better results to correct the transient response, improve accuracy and the directivity.
XLR INPUT & THROUGH OUTPUT
Balanced analogue input and through output.
Input impedance: 44 kOhm DM / 2.2 MOhm CM
RCA INPUT
Unbalanced analogue input.
A stereo input signal is internally mixed to mono.
For mono use, simply connect only the relevant channel.
Input impedance: 54 kOhm
CROSSOVERS
4th Order LR
280 Hz & 1.4 kHz
Electrical Time Aligned
Minimum Phase Filters
AMPLIFIERS
Woofer : 125 Wrms / THD+N %0.0015*
Mid : 125 Wrms / THD+N %0.0015*
Tweeter : 100 Wrms / THD+N %0.0016*
Load-Independent Frequency Response
Frequency-Independent THD
Meets 2013 ERP Lot 6 0.5W Requirements
Over Current / Thermal Protection / Auto Standby
* THD tests were performed for 1w at 1 kHz
ENCLOSURES
We believe birch is the best wood for a loudspeaker enclosure since it facilitates better clarity and tone. Every enclosure we create is crafted by hand using birch trees sourced from the forests of the eastern Black Sea Region. The Black Sea Region runs along Turkey’s Black Sea coast, bordering Georgia to the northeast which is a natural habitat of birch trees. We care deeply about the environment and strive to source our woods ethically and responsibly.
We process carefully selected birch logs and make our own plywood panels. The reason we do not use solid wood and create our own plywood panels is simply avoid warping which may occur in time by the moisture change. Since we are making timeless loudspeakers that will age with you, although this hard process takes more effort and time, it makes us feel better about creating a better speaker.
DIMENSIONS
52.6 x 27.4 x 34.8 cm
WEIGHT
22 Kg each
OPERATING VOLTAGE
Min Voltage: 100-120 Volts AC ±10%
Max Voltage: 200-240 Volts AC ±10%
Voltage Frequency: 47 - 63 Hz
Input power: 350W max
We are receiving pre-orders for this model!
© All Rights Reserved, Telegrapher Loudspeakers